POWERCAB 112 Plus Active Guitar Speaker System

SKU:
99-010-7105
$849.99

250 Watt Multi-Voice Active Guitar Speaker System For Amp Modelers. Includes additional features like a 2-inch LCD, more I/O, a second input, USB audio interface, and more.


Adding to cart… The item has been added

 

POWERCAB® 112 PLUS

Active Stereo Guitar Speaker System | Premier Amplification For Modelers

The Powercab 112 Plus active speaker system was specifically designed for use with modelers. Your amplification and speaker system is responsible for at least half of your tone and also determines how your modeling rig feels and responds to your playing—so why play through anything incapable of making your modeler sound as true to your intended tone as possible?


 

DESIGNED FOR GUITARISTS - INSIDE AND OUT

The Powercab 112 Plus guitar speaker system for modelers looks, sounds, and responds like a professional guitar amplifier, because that is essentially what it is. In Flat Mode, Powercab 112 Plus delivers a neutral frequency response from 70Hz to 20kHz with plenty of headroom. There is no need to adjust your modeler’s settings—your presets will sound just the way you expect them to. But what most clearly differentiates the Powercab 112 Plus from other products is Speaker Modeling.

SPEAKER MODELING

The sound of great amplifiers is due to the speaker as much as from the other components, yet until now no one has modeled an actual speaker driver alone, independently from the cabinet it happens to be loaded into. Line 6 has done just that by creating models of six classic and boutique speakers which drive a custom-designed hybrid coaxial loudspeaker. A lightweight cone and high-temperature 2" voice coil deliver the punch and dynamic response you expect from a guitar speaker, along with the wide range of a P.A. speaker. This design adds unparalleled authenticity to the speaker models, and consequently the sound of your amp modeler, preamp, or even your stompbox amp-simulator.

 

 

BUILT FOR GIGGING

The Powercab 112 Plus features a highly efficient 250-watt power amplifier capable of producing up to 125dB Peak SPL—enough volume to fill a small club or medium-sized venue. And Powercab 112 Plus is constructed to withstand the rigors of the road, while also being compact and weighing a mere 36 pounds (16 kgs). There’s also an XLR output featuring optimized microphone emulation for direct connection to a P.A., and foldout kickstands facilitate angled backline placement or use as an angled floor monitor.

USER IMPULSE RESPONSE (IR) PROCESSING

Powercab 112 Plus can load and store up to 128 third-party Impulse Responses, recallable as MIDI-controlled presets. These can then be customized using the free Powercab Edit software for macOS® and Windows®, available at line6.com/software.

DIGITAL CONNECTIVITY

Powercab 112 Plus features AES/EBU connectivity. Connecting it to any modeler equipped with AES/EBU capabilities reduces both latency and noise levels by avoiding the necessity of digital to analog conversion. There’s also a L6 LINK port for connecting Powercab 112 Plus directly to Helix® modelers.

THE CONSUMMATE CAB FOR HELIX

Although Powercab 112 Plus was engineered to deliver superb results with any modeler, it is the perfect sonic complement to Line 6 Helix® guitar processors, completing the chain—from guitar input to guitar speaker.

 

FEATURES:

  • Rugged-yet-lightweight plywood cabinet with flip-out kickstands
  • 2-inch LCD
  • 128 user preset locations
  • XLR direct output
  • MIDI In/Out
  • AES/EBU and L6 LINK I/O
  • Multipurpose second input
 
  • USB audio interface
  • Choice of Flat (FRFR) or Speaker Modeling modes
  • Choice of 12 onboard Speaker Models
  • Impulse response (IR) loading
  • Stereo Width control for extended stereo field
  • 250-watt amplifier delivers up to 125dB Peak SPL
  • 12" custom hybrid coaxial driver
 
  • 70Hz-20kHz neutral frequency response in Flat mode
  • Curved plywood construction results in a cabinet that is solid yet lightweight
  • 128 Presets configurable for Flat, Speaker Modeling, or IR mode
  • *Third-party IRs may also be loaded and saved within presets

PROTECT YOUR POWERCAB 112 PLUS

The outer shell features a tear and water resistant lining, and the semi-rigid foam padding offers maximum protection for the grill and finish.

Inside, the brushed-polyester lining is soft against your gear, while the rear pocket has ample room for cables, sheet music, notebooks, and accessories. (Cover sold separately)

COMPARISON CHART

 

POWERCAB 212 Plus



POWERCAB 112 Plus



POWERCAB 112

SPEAKER QUANTITY 2: Stereo/Dual Mono 1 1
SPEAKER TYPE Neodymium Coaxial Custom by Eminence® Ferrite Coaxial Custom by Eminence® Ferrite Coaxial Custom by Eminence®
COMPRESSION DRIVER(S) (2x) Celestion® CDX 1-1010 Celestion® CDX 1-1010 Celestion® CDX 1-1010
LOUDNESS SPL 131dB SPL @ 1m 125dB SPL @ 1m 125dB SPL @ 1m
PEAK WATTAGE 500 watts 250 watts 250 watts
SPEAKER SIZE 12" 12" 12"
FREQUENCY RESPONSE 70Hz - 20kHz 70Hz - 20kHz 70Hz - 20kHz
SPEAKER MODELS 12 12 (with 2.0 firmware) 6
COMBINATION INPUT JACKS 2 2 1
XLR DIRECT OUTS 2 1 1
L6 LINK/AES/EBU Input and Output Input and Output NA
USB AUDIO INTERFACE USB-B USB-B NA
USER PRESETS 128 128 NA
DISPLAY 2" LCD 2" LCD NA
CABINET MATERIAL Poplar Plywood Poplar Plywood Poplar Plywood
KICKSTANDS Yes Yes Yes
PORTING Rear Front Front
3RD Party IR SUPPORT 2048 sample mono, 1024 stereo 2048 sample NA
MIDI DIN 2: In, Out/Thru 2: In, Out/Thru NA
PRODUCT HEIGHT(in/mm) 21.14/537 18.20/462 18.20/462
PRODUCT WIDTH (in/mm) 28/711 22.3/566 22.3/566
PRODUCT DEPTH (in/mm) 12/305 12/305 12/305
PRODUCT WEIGHT (lb/kg) 47.60/21.59 36.04/16.35 34.9/15.83

 

 

© 2019 Yamaha Guitar Group. All rights reserved.
Line 6, Powercab, L6 LINK, and Helix are trademarks or registered trademarks of Yamaha Guitar Group, Inc. in the U.S. and/or other jurisdictions.